Меню

After you install windows 10

Get help with Windows 10 upgrade and installation errors

There are many reasons why you might receive an error message when upgrading or installing Windows 10, but common errors can be fixed with a few steps that you can do on your own. Note: An upgrade takes your device from an older version of Windows, such as Windows 7 or Windows 8.1, to Windows 10.

Before searching for a specific error code, try the tips listed in General fixes. If those don’t fix your upgrade or installation problem, check the table of error codes at the bottom of this article.

General fixes

Here are some things you can try to fix upgrade and installation errors:

Unplug any nonessential hardware devices. These could include headphones, printers, scanners speakers, USB flash drives, and external hard drives.

If you’re using a laptop and it’s plugged in to a docking station, undock it.

It’s a good idea to make sure that all important updates are installed before trying to upgrade Windows. This includes updates to hardware drivers on your device.

For information and to make sure you’re up-to-date, see Windows Update: FAQ.

Use Windows Defender to protect your device during the upgrade—non-Microsoft antivirus software can sometimes cause upgrade problems. As long as you have installation media and all required activation information, you can always reinstall the software after you upgrade.

To remove an antivirus application, go to Control Panel\Programs\Programs and Features. Select the program, and then select Uninstall. Select Yes to confirm.

Outdated software can cause problems with a Windows upgrade, so removing old or nonessential applications can help.

If you plan to reinstall the application later, make sure you have the installation media and all required activation information before removing it.

To uninstall software, go to Control Panel\Programs\Programs and Features. Select the program, and then select Uninstall. Select Yes to confirm.

To upgrade to Windows 10, you need enough space on your hard drive for the installation to take place.

To view how much hard drive space is available on your computer, select the Start button, then in the search box on the taskbar, type File Explorer (known as Windows Explorer in Windows 7).

Then select Computer or This PC and look under Hard Disk Drives or under Devices and drives. If there are multiple drives listed, the system drive is the drive that includes a Microsoft Windows logo above the drive icon. You’ll see the amount of available space under the drive.

If it looks like your drive is running low on space, see Tips to free up drive space on your PC.

0xC1900101 Errors

An error that begins with 0xC1900101 is usually a driver error. If you see any of these error codes, try the following steps first to fix the problem. If these steps don’t work, see Resolve Windows 10 upgrade errors for more detailed technical info.

Make sure that your device has enough space. Your device requires at least 16 GB of free space to upgrade a 32-bit OS, or 20 GB for a 64-bit OS. For more info, see Free up drive space in Windows 10.

Run Windows Update a few times. Download and install any available updates in Windows Update, including software updates, hardware updates, and some third-party drivers. Use the troubleshooter for Windows 10 to fix Windows Update errors.

Check third-party drivers and download any updates. You can find third-party drivers and installation instructions for any hardware you’ve added to your device on the manufacturer’s website.

Unplug extra hardware. Remove all external storage devices and drives, docks, and other hardware you might have plugged into your device that isn’t needed for basic functionality.

Check Device Manager for errors. Select the Start button, then in the search box on the taskbar, type device manager. Choose Device Manager from the results. In the window that pops up, look for any device with a yellow exclamation mark beside it (you may have to select each category to switch to the list of devices). Press and hold (or right-click) the device name and select either Update Driver Software or Uninstall to correct the errors.

Remove third-party security software. Make sure you know how to reinstall your programs and that any necessary product keys are on hand. Windows Defender will help protect your device in the meantime.

Repair hard-drive errors. Select the Start button, then in the search box on the taskbar, type command prompt. Choose Command Prompt from the list of results. In the window that pops up, type chkdsk/f C: and press the Enter key. Repairs automatically start on your hard drive, and you’ll be asked to restart your device.

Читайте также:  Для чего нужно резервное копирование windows 10

Note: You must have administrator permissions on your device to do this.

Do a clean restart into Windows. Learn how.

Restore and repair system files. Select the Start button, then in the search box on the taskbar, type command prompt. Choose Command Prompt from the list of results. In the window that pops up, type DISM.exe /Online /Cleanup-image /Restorehealth and press the Enter key. (Learn to repair a Windows image)

Note: You must have administrator permissions on your device to do this.

Other Common Errors

The following table lists the most common upgrade and installation errors and some things you can try to fix them. If you continue having problems upgrading or installing Windows 10, contact Microsoft support.

What it means and how to fix it

This indicates that there was a problem downloading and installing the selected update. Windows Update will try again later and there is nothing you need to do at this time.

This could indicate that an incompatible app installed on your PC is blocking the upgrade process from completing. Check to make sure that any incompatible apps are uninstalled and then try upgrading again.

A cleanup operation from a previous installation attempt is still pending, and a system restart is required to continue the upgrade. Restart the device and run setup again. If restarting device does not resolve the issue, then use the Disk Cleanup utility and clean up the temporary files and the System files. For more information, see Disk cleanup in Windows 10.

A file needed by Windows Update is likely damaged or missing. Try repairing your system files: Select the Start button and type command prompt in the search box on the taskbar. Choose Command Prompt from the list of results. In the window that appears, type DISM.exe /Online /Cleanup-image /Restorehealth and press the Enter key.

This may signify that your PC doesn’t meet the minimum requirements to download or install the upgrade to Windows 10. Learn more about the minimum requirements for Windows 10

This might indicate that a driver or other software on your PC isn’t compatible with the upgrade to Windows 10. For info about how to fix this problem, contact Microsoft support.

This could mean that the upgrade process was interrupted because you accidentally restarted your PC or signed out of your PC. Try upgrading again and make sure your PC is plugged in and stays turned on.

This error might mean that your PC couldn’t connect to the Windows Update servers. If you’re using a VPN connection to connect to a work network, disconnect from the network and turn off the VPN software (if applicable) and try upgrading again.

The error could also mean there isn’t enough free space in the System Reserved partition. You might be able to fix this problem by using third-party software to increase the size of the System Reserved partition.

Error: We couldn’t complete the updates. Undoing changes. Don’t turn off your computer.

Error: Failure configuring Windows Updates. Reverting changes.

These are generic errors that might appear any time a Windows update fails. You’ll need to determine the specific error code to investigate how to best resolve this problem.

You can find the error code for the failed update by viewing your update history. Look for the update that wasn’t installed, note the error code, and then contact Microsoft support.

To view your update history in Windows 8.1:

Open Windows Update by swiping in from the right edge of the screen (or, if you’re using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), select Settings > Change PC settings > Update and recovery > View your update history.

To view your update history in Windows 7:

Select the Start button. In the search box, type Update, and then, in the list of results, Select Windows Update > View update history.

Error: The update isn’t applicable to your computer.

This error might mean that your PC doesn’t have the required updates installed.

Check to make sure that all important updates are installed on your PC before you try upgrading.

This likely indicates that your PC doesn’t have enough space available to install the upgrade.

Free some space on the drive and try again. Get tips for freeing up drive space

The specified disk operation is not supported by the target disk, partition, or volume.

Читайте также:  Adb exe adbwinapi dll adb windows exe adbwinusbapi dll fastboot exe

Make sure your machine meets the minimum requirements to install Windows 10.

The system cannot find the file specified.

If you have a disk or disks where you are not installing Windows 10 on, remove those disks.

A driver has caused a problem.

Disable or remove all 3rd party antivirus or antispyware from your system. Disconnect all peripheral devices that are connected to the system, except for the mouse, keyboard and display.

Contact your hardware vendor to obtain updated device drivers.

Windows Setup terminated unexpectedly due to another process running in the background.

When you start Windows by using a normal startup, several applications and services start automatically, and then run in the background. These programs include basic system processes, antivirus software, system utility applications, and other software that has been previously installed. These applications and services can cause interference when you attempt to upgrade to the latest version of Windows 10.

To help you determine whether a background program is interfering with the upgrade, a «clean boot» may be needed. See How to perform a clean boot in Windows.​

Windows Setup terminated unexpectedly due to another process running in the background.

Uninstall any antivirus or antispyware software and update again.

How to: 10 things to do after installing Windows 10

Technical Level : Basic

If you just performed an upgrade or new installation of Windows 10, here are some things you should right away.

This article can now be found in its entirety at Groovypost.com
Top Things to Configure After Upgrading to Windows 10

Learn more:

Was this article helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this article?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this article?

Thanks for your feedback.

Comments (3) 

Wow, just got a free install of Win 10 and I have issues and errors I cannot fix. I am not techie, but can follow most directions, unless they instruct you to do actions that are not fully explained or I don’t know how to do.

I did try and get Autologin on my desk top. I downloaded a file, it shows up in my files, but does not work. I keep having to sign in. Other issues exist. I now have NO sound and no recognition of the driver I did have in Win 7. Not sure what to do there. Well, you get the picture. I’d like answers to my Win 10 «fails», in a simpler explanation and fix. It’s frustrating and I wish I had Not changed to 10. I will try to fix, but not finding answers. Oh, another BIG issue is that with some instructions they show a start menu or action that does not look like the box I get when I click Start. sigh.

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this comment?

Thanks for your feedback.

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this comment?

Thanks for your feedback.

Wow, just got a free install of Win 10 and I have issues and errors I cannot fix. I am not techie, but can follow most directions, unless they instruct you to do actions that are not fully explained or I don’t know how to do.

I did try and get Autologin on my desk top. I downloaded a file, it shows up in my files, but does not work. I keep having to sign in. Other issues exist. I now have NO sound and no recognition of the driver I did have in Win 7. Not sure what to do there. Well, you get the picture. I’d like answers to my Win 10 «fails», in a simpler explanation and fix. It’s frustrating and I wish I had Not changed to 10. I will try to fix, but not finding answers. Oh, another BIG issue is that with some instructions they show a start menu or action that does not look like the box I get when I click Start. sigh.

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

10 things to do after installing or upgrading to Windows 10

So you have upgraded to Windows 10. That is great! There are a few things you may want to do now. This post will tell you the some important settings you need to take a look at & things you need to do after installing or upgrading to Windows 10.

Читайте также:  Драйверы для nvidia geforce gt 540m для windows 10 64 bit

Things to do after you install or upgrade to Windows 10

1] Check for Updates and its settings

Once the upgrade process is completed, I suggest you open the Start Menu and click on Settings to open the Settings app. Next click on Update and Security. Here, under Windows Update, click on Check for updates button. There may be more updates – especially some new features device drivers that your system may want to download.

Let the download and installation complete and then restart your computer. Wait for a while and let all the system processes complete their job and settle down. Again open Windows Update settings. Ensure that you are not set to get Insider Builds. Under Advanced settings, you may want to change the default Automatic Restart to Notify to schedule restart. Also, decide if you want to Defer Updates.

Next, click on the Choose how upgrades are delivered and then move the slider to Off position, to turn off Windows Update Delivery Optimization or WUDO.

2] Take additional actions

Check the Notifications and Action Center. Check if your Windows 10 is activated. See if there are pending things you need to complete. Click on them for more details.

3] Is your antivirus software running?

Check if your security software is activated and working. My third-party security suite, along with a few other software, was deactivated. I had to reinstall them. If you use the built-in Windows Defender, you may need to configure Windows Defender settings, update it manually the first time and run a full scan. You may also want to check if all your other programs are working – like some have reported that AutoCAD was not working after Windows 10 upgrade.

4] Manage Wi-Fi Sense

You need to check your Wi-Fi Sense settings. Wi-Fi Sense is a feature in Windows 10 that allows you to connect to your friend’s shared Wi-Fi connections. You can manage your Wi-Fi settings and decide whom the Wi-Fi details should be shared with, or you may turn off Wi-Fi Sense completely. I have turned it off, as I have no interest in sharing my Wi-Fi network details with my Facebook, Outlook.com or Skype contacts.

5] Personalize Windows 10

Personalize your Windows 10 experience. Especially set the Colors settings via Settings app > Personalization > Colors. Customize the Windows 10 Start menu to suit your requirements. You may want to personalize a few more things too.

Make File Explorer open to This PC instead of Quick Access, if you wish to. Install or move Windows 10 Apps to another Drive. As of date, this feature has been deferred for a later time, so it may not be available currently. Set Sign-in options. Sign in securely using a PIN. Set up a PIN. Set the quick links you want to appear in the Start Menu using the Personalization app.

Unpin programs from the taskbar or Start Menu that you don’t need, and add your favorite ones there.

Change Windows 10 Privacy settings. Our Ultimate Windows Tweaker 4 will let you easily tweak Windows 10 Privacy settings and more!

6] Set default programs and browser

Don’t like using the built-in default apps or programs? Change default programs. You may want to set your default browser, change the default media player or any other program.

7] Tweak Microsoft Edge

Take a look at Microsoft Edge. Import your browser bookmarks and favorites into the Edge browser. Change your home page, Change your default search engine if you wish. These Edge browser tips and tricks will help you get the best out of Microsoft Edge.

8] Set your Search bar settings

Do you want to make the Search Bar smaller and create more space on the taskbar? Right-click on the taskbar > Search > Show icon only. Do you want to taskbar search to search locally the computer only and not the web? Turn off web search in that case.

9] Use the Battery Saver Mode

Make Windows 10 battery last longer. Use the new Battery Saver mode. When activated, the feature conserves battery life by limiting the background activity and adjusting the hardware settings.

Anything I missed?

Now take a look at these Windows 10 tips and tricks to get the best out of this new operating system.

Date: March 2, 2020 Tags: Tips, Windows 10

Adblock
detector