Mac os internet recovery ошибка 2003f

Question: Q: Error -2003f when booting Macbook Pro

It restarted it by accident and then when I try to put the network in my laptop is was literally loading for hours so I can’t get back in what did I do? And then it says smt weird

[Re-Titled by Moderator]

MacBook Air 13″, macOS 10.15

Posted on Nov 1, 2020 1:00 PM

All replies

Loading page content

Page content loaded

Thank you for using Apple Support Communities. It seems like you are not able to start up from macOS Recovery. Take a look at the «If you can’t start up from macOS Recovery» section.

«If you can’t start up from macOS Recovery

If your Mac can’t start up from its built-in macOS Recovery system, it might try to start up from macOS Recovery over the Internet. When that happens, you see a spinning globe instead of an Apple logo during startup:

To manually start up from Internet Recovery, press and hold either of these key combinations at startup:

If startup from Internet Recovery is unsuccessful, you see a globe with an alert symbol (exclamation point):

In that case, try these solutions:

• Make sure that your Mac can connect to the Internet. If you’re not prompted to choose a Wi-Fi network during startup, move your pointer to the top of the screen, then choose a network from the Wi-Fi menu , if available.
• Press Command-R at startup to try using the built-in Recovery system instead of Internet Recovery.
• Connect to the Internet using Ethernet instead of Wi-Fi, or vice versa.
• Connect to the Internet from a different Wi-Fi or Ethernet network. Your network configuration might not allow the Internet access that macOS Recovery needs.
• Try again later, because the issue might be temporary.
• Start up from another disk or volume, if available, or use a bootable installer to reinstall macOS.

If you still need help, please contact Apple Support.»

Please don’t hesitate to let us know if the steps resolved your issue or if you need additional assistance.

Источник

Question: Q: what does -2003F error mean?

after holding option key i choose the only one option there — internet recovery (or something like that); after this (

30 minutes) it prompted:

MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.2)

Posted on Mar 19, 2014 1:48 PM

Helpful answers

I have just had the exact same issue, i had a problem with a critical update failing and getting into a boot loop, CMD-R to check with first aid, disk ok, had to do a reinstall on top of current build, failed with a software update, luckily had a time machine backup, so blatted the macbook to reinstall, got internet recovery error the same as above with code -2006F

Now what REALLY frustrates me is that i had the same issue last week, went to genius bar, they did a factory image install, bit only to Sierra as they didn’t have High Sierra image available!!

Told to go home and update to High Sierra and the same again, Macbook Pro 13 with Touchbar 2016.

Dec 29, 2017 8:21 AM

it is shown on macbook screen.how to solve it.i was tried holding option and after pressing key i. but it didn’t work.

Nov 22, 2017 2:15 AM

There’s more to the conversation

Loading page content

Page content loaded

The main problem is appearing blinking question mark against the background of folder (this problem disappears after a long time working of mac)

Mar 19, 2014 1:55 PM

I cannot find a definitive description for the error, but it is an Internet Recovery error of some kind. Be sure you have disconnected all external peripherals except the Apple mouse.

I would attempt to boot from your Recovery HD. Using network recovery should only be attempted if you don’t have a Recovery HD:

Boot to the Recovery HD:

Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the arrow button below the icon.

What is it you are attempting to do and why?

Mar 19, 2014 1:56 PM

as i said in my second message in this topic, i have a big startup’s problem with macbook air md760; sometimes it’s loading properly, sometime fails; i don’t know the the cause of it, but i think it’s hard drive issue (when i load disk utility it doesn’t detect any ssd on mac)

Mar 19, 2014 2:00 PM

this problem reproducing after long time shutdown of mac

Mar 19, 2014 2:02 PM

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive

Boot to the Recovery HD:

Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

Repair

When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.’s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say «Verified» then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is «Verified» then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.

Reinstall Mountain Lion or Mavericks

Note: You will need an active Internet connection. I suggest using Ethernet

if possible because it is three times faster than wireless.

Источник

1008F — или как раскирпичить свой Mac

Всем привет! В этом посте речь пойдет о бесконечном режиме восстановления macOS, ошибках 1008F, 2003F, 2004F и о том как их побороть.

Подобные ошибки можно встретить при попытке выполнить Internet Recovery своего Mac, а причин побуждающих к этому действию — множество. В моем случае, дело было так..

Предыстория

Одним осенним прохладным днем, пришло мне обновление Xcode 12.2 , а вместе с ним и macOS Big Sur. После обновления Xcode, он стал жутко тормозить, зависать, вылетать и терять последние изменения. Через несколько попыток переустановки Xcode, было принято решение обновиться до Big Sur. В принципе, проблему это не решило, зато багов докинуло. Затем, начался процесс переустановки macOS Big Sur с загрузочной флешки и из проблем осталось только отсутствие поддержки симуляторов iOS

4. Выбрать проблемный MacBook и нажать «удалить из Найти айфон«;

6. Покинуть программу:

7. (Опционально) Удалить проблемный Mac из учетной записи Apple (Из списка устройств).

После этого можно попробовать восстановиться еще раз. К сожалению, данный способ мне не помог.

Я позвонил в службу поддержки Apple, где мне сообщили о том, что в моем случае 1008F возникает исключительно из-за плохого интернета (на самом деле из-за плохого интернета возникают ошибки 200+F). Также, мне посоветовали обратиться в авторизованный сервис (что логично) т.к. там и специалисты граммотные, и интернет хороший. Тут стоить отметить, что претензий к поддержке Apple я не имею. Было опробовано несколько Wi-Fi сетей в т.ч. и с мобильных устройств. Итог один — не помогло.

Путь сложный:

Далее возникла идея: поскольку жесткий диск несъёмный, слишком дорого было бы для Apple решать такие вопросы заменой материнских плат. Должна была быть какая-то лазейка, типа DFU режима, который был очень популярен на айфонах 3gs и 3g. Легкий гуглинг навел меня на несколько интересных статей: тут и тут. Дублировать содержимое статей смысла не вижу, в целом, они о том как вводить Mac в DFU режим и как с ним работать.

1. Нам нужен еще один Mac (к счастью такой нашелся);

2. Соединяем наш Mac (клиент) со вторым Mac (сервер) кабелем питания UCB-C — UCB-C (руководство по ссылкам выше);

3. Скачиваем на Mac (сервер) утилиту Apple Configurator 2 и запускаем ее;

4. Вводим Mac (клиент) в DFU;

5. В утилите Apple Configurator 2: Правая кнопка мыши > Actions > Advanced > Revive Device:

6. После того как все loading — индикаторы прокрутятся:

а на Mac (клиент) произойдет вот это:

нужно попробовать запустить процедуру восстановления через Shift-Option-Command-R.

7. Если вы по прежнему получаете 1008F (не 2003F, 2004F — о них позже), переходите к п8.

8. Требуется повторить действия с п.1 по п.4. После чего выбрать Apple Configurator 2 пункт Restore.

9. У вас надеюсь все будет хорошо, а вот я получил сообщение об ошибке:

что-то типа такого, только код был другой.

10. Далее я вывел Mac (клиент) из DFU режима и загрузил его через Shift-Option-Command-R.

11. Начался заветный процесс восстановления, который периодически падал в ошибки 2003F и 2004F.

2003F, 2004F

2003F, 2004F — это ошибки связанные с нестабильным, медленным интернет соединением. Поговаривают, что есть и другие 200+F ошибки, но их я на своем пути не встретил.

Тут стоить отметить, что интернет-провайдер у меня полное расстройство, поэтому решение было следующим:

На роутере я прописал DNS: основной сервер 8.8.8.8, альтернативный 8.8.4.4;

Сделал WI-FI сеть без пароля, но с фильтрацией по MAC — адресам, поскольку наткнулся на информацию о том, что Mac в процессе Internet Recovery может забывать пароль от WI-FI;

Также могут помочь сброс NVRAM или PRAM;

Запускать Mac через Shift-Option-Command-R, можно даже после того, как вы получили ошибку 200+F. Бывают случаи, когда загрузка происходит не с первого раза;

В моем случае, я дождался 6 утра, пока основные пользователи моего провайдера спят, а в Купертино — ночь, значит нагрузка на сервера Apple значительно меньше. Загрузил Mac через Shift-Option-Command-R и случилось чудо.

Дальше у меня загрузился Recovery macOS Mojave, т.к. именно с ней поставлялся MacBook. В дисковой утилите жесткий диск определялся как неизвестное устройство, после форматирования его со схемой разделов GUID, установка macOS продолжается в обычном режиме.

Заключение

На всю эту историю у меня ушло в сумме около трех дней, поэтому если этот пост сэкономит кому-нибудь хоть каплю времени и нервов — будет отлично. Тем не менее, прошу обратить внимание: описанное выше происходило со мной, у вас может быть иначе. Все действия вы выполняете на свой страх и риск. От себя — я бы рекомендовал перед переустановкой macOS включать загрузку с USB — носителей, отвязывать Mac от учетки и выполнять установку с флешки. Жалею ли я о том, что не сделал так сам? — Нет 🙂

Желаю вам легких апдейтов, даунгрейдов и вообще поменьше багов и лагов.

По результатам опроса, написал о том как откатиться с macOS Big Sur до macOS Catalina. Прочитать об этом можно тут. Спасибо за проявленный интерес!

Источник

How to Resolve Error Code -2003f on Mac

Download and try Outbyte MacAries right now to see what it can do for your Mac.

Developed for macOS

Reinstalling macOS is usually the last option when fixing an error on Mac. Installing a fresh copy of the Mac operating system should resolve all problems that your computer is experiencing, even those that are normally difficult to get rid of.

You can re-install macOS via the Recovery menu, which can be accessed by holding down Command + R during startup. You can choose to re-install using a bootable USB drive or using Internet Recovery. Most users prefer the latter because it is faster and more convenient.

However, Internet Recovery is not always a good option, especially if your internet connection is not stable. One of the issues that could occur is error code -2003f. Some Mac users reported trying to reinstall macOS Sierra, but error code -2003f appeared, causing the installation to fail. This error can also happen when re-installing other versions of macOS.

What Is Error Code -2003f?

Error code -2003f happens when users try to re-install macOS using Internet Recovery after reformatting the drive. The error may cause your Mac to freeze and the installation of the operating system to fail. Aside from an unresponsive machine, you might also see a spinning globe or a blank screen that means the reinstallation process got stuck. You might even lose all access to your computer because of the bug.

Pro Tip: Scan your Mac for performance issues, junk files, harmful apps, and security threats
that can cause system issues or slow performance.

Some users who were trying to install macOS Sierra but got error code -2003f reported seeing a flashing folder with a question mark before the error appeared. The flashing folder with a question mark means that your Mac cannot find its system software, making it impossible to proceed with the installation.

What Causes Error Code -2003f?

Poor internet connection is the leading cause of this error. Negative error codes in this range are usually associated with Wi-Fi problems. This means that your internet connection is not sufficient to successfully complete the process. The error often happens when you’re doing internet recovery over Wi-Fi connection.

Aside from poor unstable internet connection, other factors that could lead to error code -2003f include virus infection, hard disk errors, and incomplete installation of macOS. We’ve listed here several ways to resolve this problem and get rid of this error code.

How to Fix Error Code -2003f

Fixing error code -2003f is simple, especially once you’ve narrowed down the real cause of the problem. Getting rid of the junk files on your Mac with the help of Mac repair app can help rule out other factors that might be causing the error. Scan your Mac with your antivirus software as well before doing any troubleshooting to make sure that viruses are not wreaking havoc on your computer.

Once you’ve completed these steps, you can then proceed with the fixes below.

Fix #1: Switch to Wired Connection.

Since the main reason behind this error is a poor internet connection, switching to wired connection should be your first course of action. Disconnect your Wi-Fi connection first, then restart your router. Next, use an ethernet cable to connect your Mac to your router, then try running Internet Recovery again to see if the error has been fixed.

Fix #2: Reset PRAM and NVRAM.

Another way to fix error code -2003f is to reset the Parameter RAM (PRAM) or Non-Volatile RAM (NVRAM). NVRAM, which is the modern version of PRAM, stores system settings, including serial port configuration and definition.

To reset your Mac’s PRAM/NVRAM, follow the steps below:

1. Restart your Mac.
2. When you hear the startup sound, hold down Command + Option + P + R immediately.
3. Hold this combination for 20 seconds, then let go to continue booting up.
4. If you have an older version of Mac, keep holding the keys until you hear the second startup sound.

Try reinstalling via Internet Recovery again to see if you can complete the process successfully.

Fix #3: Run Disk Utility.

A damaged or defective hard drive can cause several problems for your Mac, including error code -2003f. You can use macOS’ built-in disk utility to repair a damaged or defective hard drive.

Follow these instructions to run the disk tool to restore your drive:

1. Launch macOS Utilities by restarting your Mac and holding down Command + R.
2. Release the keys when the macOS Recovery page loads.
3. Click on Disk Utility from the options, then hit Continue.
4. Click View, then Show All Devices.
5. Choose your installation disk from the sidebar.
6. Click the First Aid Button >Run.
7. Follow the on-screen instructions to repair the disk.

Once the hard drive has been repaired, check if you are able to re-install macOS without encountering error code -2003f.

Fix #4: Use a Bootable USB Installer

If reinstalling via Internet Recovery doesn’t work, you can use a bootable installer instead to install the Mac operating system. This allows you to install macOS even with poor internet connection.

To create your bootable installer, follow the steps below:

1. Download your preferred macOS. For macOS Mojave, you can get it directly from the App Store.
2. For older versions of macOS, check the Purchased tab of your App Store and download the installer from there.
3. When the installer loads after downloading, quit it immediately.
4. Find the installer file in your Applications folder. It should be named Install .
5. Connect the USB device or external hard drive you are going to use as the bootable media to your Mac. Make sure it has at least 12GB of free space and is formatted as Mac OS Extended.
6. Launch Terminal from the Utilities folder.
7. Type in the command that corresponds to the macOS version you want to install:
   • Mojave:sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia –volume /Volumes/MyVolume
   • High Sierra:sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia –volume /Volumes/MyVolume
   • Sierra:sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia –volume /Volumes/MyVolume –applicationpath /Applications/Install\ macOS\ Sierra.app
   • El Capitan:sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia –volume /Volumes/MyVolume –applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app
8. Hit Enter to execute the command.
9. Type in your account name and password to proceed.
10. Press Y to erase the volume.
11. Wait for the process to be completed, then eject the volume afterwards.

To use the bootable installer to reinstall macOS, edit your startup preferences using Startup Manager and choose your USB or hard drive as the startup disk. Your computer will then start up to macOS Recovery. Just click the Install macOS button and follow the on-screen instructions from there.

Summary

Getting error code -2003f while reinstalling macOS via Internet Recovery can be irritating because it compounds whatever problem you are experiencing instead of fixing it. Fortunately, the methods above should help resolve this error and allow you to finish the installation process successfully.

Источник