SOLVED: Windows 10 Won’t Install or Download Updates

While Windows 10 is the latest and greatest iteration of the Windows Operating System in existence, it is far from perfect. That being the case, Microsoft periodically rolls out tons of updates for both Windows 10 and the programs and applications that it contains. Unlike with older versions of Windows, however, all updates rolled out to Windows 10 computers via Windows Update are mandatory and are automatically downloaded and installed at one time or another. Regardless of the important status of an update and regardless of whether or not you want to install it, it will eventually be downloaded and installed, although you do have the power to delay the occurrence slightly.

Some Windows 10 users, unfortunately, have been and continue to be affected by an issue where their computers accumulate tons of pending updates, some of which are marked as waiting to be downloaded, some marked as waiting to be installed, but none actually being downloaded or installed no matter how many times affected users try to download and install them. When users affected by this issue go into Windows Update, they see a list of all of the updates available for their computer but are unable to download and/or install any of them even though some are marked as waiting to be downloaded and some waiting to be installed.

Thankfully, though, this problem is not a dead-end problem and can be fixed by pretty simple means. The following are the three most effective solutions that you can use to try and fix this problem:

Repair Corrupt System Files

Download and run Restoro to scan for corrupt files from here, if files are found to be corrupt and missing repair them and then check if it fixes the issue, if not then proceed with Solutions listed below.

Before you Proceed: Make sure to leave the process for at least an hour or two to make sure that Windows isn’t just initializing updates.

Solution 1: Run the Windows Update Troubleshooter

If a Windows 10 component is not working or behaving the way it is supposed to, what you need to do is simply run Windows 10’s built-in Troubleshooting utility, but run it specifically for the component that is malfunctioning. The same applies to Windows Update – since Windows Update is behaving strangely, the first solution you should try out is running the Windows Update Troubleshooter. To do so, you need to:

1. Open the Control Panel.
2. Switch to Icons
3. Click on Troubleshooting.
4. Click on View all in the left pane.
5. Click on Windows Update.
6. Click on Next, and then proceed with the troubleshooter all the way through to the end, following the on-screen instructions along the way.

The Troubleshooter will try to identify any and all problems with Windows Update and fix any problems that it finds. Once you have successfully run the Troubleshooter, you should restart your computer and try downloading and installing Windows Updates once it boots up to see whether or not the issue still persists.

Solution 2: Ensure that all services related to Windows Update are running

You may be facing this Windows Update issue if one or more of the services pertaining to Windows Update is either not enabled or are not running on your computer. If that is the case, this issue can be easily remedied by making sure that all Windows Update-related services are enabled and running.

1. Hold down the Windows Logo key, and while doing so, press R to open a Run
2. Type services.msc into the Run dialog and press Enter.
3. Locate and right-click on the Windows Update service, and click on Properties.
4. Set the service’s Startup type to Automatic, if the service is stopped, click on Start to start it, click on Apply and then click on OK.
5. Locate and right-click on the Background Intelligent Transfer Service (BITS), and click on Properties.
6. Repeat step 4.
7. Locate and right-click on the Cryptographic Service, and click on Properties.
8. Repeat step 4.

Close the utility, restart your computer and check to see whether or not the problem has been fixed once it boots up.

Solution 3: Using a Registry Tweak to reset Windows Update

If the solutions provided above doesn’t fix your problem there is a possibility that registry keys are corrupted or modified there is a Registry Tweak that you can try, basically it will reset the Windows Update‘s registry keys and set them to default which can potentially fix the issue you are having.

1. Click hereto download the Registry Tweak.
2. Wait for the Registry Tweak to be downloaded.
3. Navigate to where the Tweak was downloaded to and double-click on it to run it.
4. There will be a pop-up asking “Are you sure you want to continue?” Press “Yes”
5. Now press ok.
6. Restart your Computer then check to see if the issue still persists.

Solution 4: Fix the issue via an elevated Command Prompt

If none of the solutions listed and described above have worked for you, you may just be able to fix this issue through an elevated Command Prompt. In order to do so, you need to:

1. Right-click on the Start Menu button to open the WinX Menu.
2. Click on Command Prompt (Admin).
3. One by one, type the following commands into the elevated Command Prompt, pressing Enter after typing in each one and waiting for one command to be executed fully before typing in the next:

Once all of the commands listed above have been fully executed, close the Command Prompt and restart your computer.

Check whether or not you are now able to download and install updates via Windows Update once your computer boots up.

Solution 5: Turn OFF Metered Connection

In some cases, the internet connection that you are using might be set up as a metered connection due to which the download restriction might be implemented on it. Therefore, in this step, we will be turning this metered connection OFF and then check to see if the issue still persists. For that:

1. Press “Windows” + “I” to open settings.
2. Click on the “Networkand Internet” option. Selecting “Network and Internet” Options
3. Click on the “Wifi” option on the left pane and select “Manage known Networks” in the next window. Accessing the Manage known networks menu
4. Click on the Wifi name in the next window and select “Properties”.
5. Click on the “Toggle” for “Set as Metered Connection” to turn it off.
6. Check to see if the issue persists.

Troubleshoot problems updating Windows 10

In Windows 10, you decide when and how to get the latest updates to keep your device running smoothly and securely. This article will help you answer questions and troubleshoot common problems with your Windows 10 update.

If you’re looking for info on how to activate Windows 10 or to verify that your installation of Windows 10 is activated, see Activate Windows 10.

Have issues installing Windows updates? Start here.

Your device may not be able to update to the latest version of Windows 10 for a few reasons. The following tips can help you pinpoint the issue affecting your device.

Before you begin, make sure your device is plugged into a power source and connected to the internet. Then, try the steps listed below to get your PC to update.

Some updates require administrator access. If your account doesn’t have administrator access, see Create a local user or administrator account in Windows 10. Or if someone else at home or in your office has an administrator account on your device, try asking them to install the updates.

Before trying any of the solutions below, make sure you back up your personal files. You can use File History to back up your files to another drive, or insert a USB drive and use File Explorer to drag and copy important files to the USB drive. If you’re signing into Windows with a Microsoft account, your system settings will be automatically restored after updating, once you’re connected to the internet.

You can also back up your files with OneDrive. For more info, go to Back up your Documents, Pictures, and Desktop folders with OneDrive.

Make sure that your device has enough space. Your device requires at least 16 GB of free space to upgrade a 32-bit OS, or 20 GB for a 64-bit OS. If your device has a small hard drive, you may need to insert a USB drive to update it.

If your PC is running low on storage, try the techniques at Free up drive space in Windows 10.

Many updates require you to restart your device. Save your work and close all open applications. Then, select Start > Power , and select either Update and restart or Update and shut down.

Even if you have downloaded some updates, there may be more available. After trying the preceding steps, run Windows Update again by selecting Start > Settings > Update & Security > Windows Update > Check for updates. Download and install any new updates.

Remove any external storage devices and drives, docks, and other hardware plugged into your device that aren’t needed for basic functionality. Then try to run updates again and see if this resolved your issue. If it didn’t, continue to the next tip.

If you’ve added hardware to your device, check for third-party driver updates and installation instructions on the hardware manufacturer’s website. Update any drivers, then try to run updates again and see if this resolved your issue. If it didn’t, continue to the next tip.

In the search box on the taskbar, type device manager, then select Device Manager from the list of results.

In the window that appears, look for any device with a yellow exclamation mark next to it. (You may have to select each category to view the list of devices.) Select the device name.

Select Action, and then choose either Update driver or Uninstall to correct the errors.

Common troubleshooting questions

If you are receiving an error message with a specific error code, try running the Windows Update Troubleshooter. If that doesn’t resolve the issue, see Fix Windows Update errors and follow the instructions to help resolve common update issues.

The time required to download and install updates depends on connection speed, network settings, and the size of the update. If the installation remains stuck at the same percentage, try checking for updates again or running the Windows Update Troubleshooter.

To check for updates, select Start > Settings > Update & Security > Windows Update > Check for updates.

To get help, in the search box on the task bar, type get help, then select Get Help from the list of results. To leave feedback if you run into further problems, in the search box on the taskbar, type feedback hub, then select Feedback Hub from the list of results.

Windows 10 is the most secure Windows ever, and we recommend you stay updated to protect your PC from security risks and to keep it running smoothly. However, you can temporarily pause updates as well as schedule a restart to install updates at a time that’s convenient for you.
Learn how to temporarily pause updates
Find out how to schedule a restart to install updates at a convenient time

You will only receive a notification when it’s time to restart your computer to apply the installed updates.

If you need to know where you left off in your work after an update, use Timeline to jump back in.

To get started with Timeline, select Task View on the taskbar, or press the Windows logo key +Tab and select the activity you want to resume.

Monthly quality updates on Windows 10 are quite small and have a minimal impact on data usage. Feature updates typically happen twice per year, and you can control when to install them. They require more data but are less frequent.

If you’re on a metered connection, some updates for Windows won’t be installed automatically. Metered connections in Windows 10

Your computer might be slow for a number of reasons, but updating to the latest version of Windows 10 can improve its performance. For help with a slow computer, see Tips to improve PC performance in Windows 10.

If you’re having trouble finding your files after an upgrade, see Find lost files after the upgrade to Windows 10 for other things to try.

Warning: Microsoft only recommends trying the procedures in this section if you’re comfortable working in the command line. These procedures require administrator permissions on your device.

In the search box on the taskbar, type command prompt, then select Run as administrator from the list of options. Select Yes. Next, in the window that appears, type the following commands one at a time, including the spaces as shown. After you type each command, press Enter. Then let each command complete before you type the next command.

net stop wuauserv

ren %systemroot%\softwaredistribution softwaredistribution.bak

ren %systemroot%\system32\catroot2 catroot2.bak

net start wuauserv

After all these commands are completed, close the Command Prompt window and restart your computer.

In some instances, third-party antivirus or security software can cause errors when you try to update to the latest version of Windows 10. You can temporarily uninstall this software, update your PC, and then reinstall the software after your device is up to date. We recommend using third-party antivirus or security software that’s compatible with the latest version of Windows 10. You can check compatibility by visiting the software manufacturer’s website.

Note: Before uninstalling software, make sure you know how to reinstall your programs and that you have any necessary product keys.

In the search box on the taskbar, type command prompt, and then select Run as administrator from the list of options. Select Yes. In the window that appears, type the following command, including the space as shown:
chkdsk/f C:
and then press Enter. Repairs will automatically start on your hard drive, and you’ll be asked to restart your device.

A clean restart starts Windows with a minimal set of drivers and startup programs. This helps eliminate software conflicts that occur when you install a program or an update that may cause issues updating your PC.
Learn how to do a clean restart

In the search box on the taskbar, type command prompt, then select Run as administrator from the list of options.

In the window that appears, type this command including spaces as shown:
DISM.exe /Online /Cleanup-image /Restorehealth

Press Enter. When the command operation has run successfully, you’ll see a confirmation message from Command Prompt that says, “The restore operation completed successfully” or “The operation completed successfully”.
Note: If you don’t see a confirmation message, retype the command and try again.

Next, type this command, including the space as shown:
sfc /scannow

Press Enter. Wait until the sfc scan verification reaches 100% completion, and then close Command Prompt.

Try running the Windows Update again.

Go to the software download page and select Download tool now to download the clean installation tool. Make sure to carefully read the notes on the software download page before using the tool.

Still stuck?

Contact Microsoft support if you continue to have problems with your Windows updates.